SCOTT AERATOR: CLOVER BIG SHOT FOUNTAIN 1.5-HP
The “Clover” 1.5 Horsepower fountain creates an impressive cascade of water that sounds as beautiful as it appears! The brass center nozzle of the “Clover” is surrounded by separate side nozzles which create a spectacular angled spray pattern. The “Clover’s” main stream will reach a height of 40 feet, while the side nozzles project an amazing 20 feet!
Form and function can co-exist, as the “Clover” not only beautifies your pond but it also provides a healthy aquatic environment thru high oxygen transfer rates and the large volume of water circulation. Like all of the products Scott Aerator manufactures, the “Clover” utilizes a stainless steel, oil-free submersible motor, making it the most environmentally friendly style of fountain on the market. The “Clover” is proudly manufactured in the USA and carries an unconditional 5-year motor warranty. This unit comes with 100 feet of submersible 12 gauge cable, greater lengths available. Available with lights or without. Motor size 1 ½ hp, 230 volt.
There are 4 Scott Aerator Lighting Options for this product. There is a 2 Light LED Option and a 4 Light LED Option. There is also a 2 Light Halogen Option and a 4 Light Halogen Option.
The Halogen lights are much cheaper than the LED lights, but they are not as energy efficient and they also have a shorter life expectancy.
Timer Control Panel
There is a Timing Control panel option for this product that allows you to easily save money on your power bill by setting time constraints on when your fountain and lights are on. If you buy the timer control panel with lights for this product, then you will receive a timing control panel that comes with 2 separate timers. Allowing you to set different times for your lights and for your fountain. If you select the timer control panel option without having a light. Then you will receive a single timer.
- 1 ½ HP 230 Volt 1½ HP Oil Free Motor
- 90 Gallons of Water per Minute
- Center Stream is 40 Feet High
- Side Jets Angled Spray Pattern is 20 Feet
- Electric Cable Provided is 100 Feet in length, 12 gauge submersible
- Electric Cable Can Be Ordered In Greater Lengths
- Light Kits Can Be Added Later
- Salt Water Approved
- Two 20lb. Weights or Concrete Block Required For Anchoring (Not Included)
- Two Nylon Ropes Required For Anchoring (Not Included)
- Designed for 24 Hour per Day Operation
- No Maintenance Required
- 38” Minimum Pond Depth Required
- Motor Specs: 60 HZ, Single Phase, 10.6 Amps, 1780 Watts
- 5 Year Motor Warranty
Removing the Fountain from the water each winter will dry out and potentially damage the pump seals. Simply leave your fountain in the water, turn the power supply o , and forget about it for the winter. Once the water thaws in the spring, re-establish power to the unit and you’re good to go. All of the components will withstand sub-zero conditions without damage.